The LM2902LV is a quad 5.5V, 1MHz, 3mV offset voltage op amp

These op amps can replace the LM2904 and LM2902 in cost-sensitive low-voltage applications. Some applications are large appliances, AD7998BRU-0 smoke detectors, and personal electronics. LM290xLV devices offer better performance at low voltages than LM290x devices and consume less power. The op amp is stable at unity gain and has no inversion under overdrive conditions. The ESD design provides a minimum 2 kV HBM specification for the LM290xLV family.

The LM290xLV family is available in industry standard packages. Packages include SOIC, VSSOP and TSSOP packages.

characteristic:

●Industry standard amplifier for cost sensitive systems

●Low input offset voltage: ±1 mV

● Common mode voltage range includes ground

● Unity gain bandwidth: 1 MHz

●Low broadband noise: 40 nV/√Hz

●Low quiescent current: 90 μA/Ch

●Unity gain stable

●Operates from 2.7 V to 5.5 V supply voltage

●Two- and four-channel variants available

●Strong ESD specification: 2-kV HBM

●Extended temperature range: –40°C to 125°C

parameter:

Number of channels (#): 4

Total supply voltage (max) (+5V=5, +/-5V=10): 5.5

Total Supply Voltage (Min) (+5V=5, +/-5V=10): 2.7

Rail to Rail: Enter V-

GBW (typ) (MHz): 1

Slew rate (typ) (V/us): 1.5

Vos (offset voltage @ 25 C) (max) (mV): 3

Iq (Typ) (mA) per channel: 0.09

Vn (typ) at 1 kHz (nV/rtHz): 40

Operating Temperature Range (°C): -40 to 125

Offset Drift (Typical) (uV/C): 4

Features: Cost Optimization, EMI Enhancement

Input Bias Current (Max) (pA): 15

CMRR (typ.) (dB): 92

Output current (typ.) (mA): 40

Architecture: CMOS