TSC103IPT High voltage, high side current sense amplifier
The TSC103 measures a small differential voltage on a high-side shunt resistor and translates it into a ground-referenced output voltage. The gain is adjustable to four different values from 20 V/V up to 100 V/V by two selection pins.
Wide input common-mode voltage range, low quiescent current, and tiny TSSOP8 packaging enable use in a wide variety of applications.
The input common-mode and power-supply voltages are independent. The common-mode voltage can range from 2.9 V to 70 V in the single-supply configuration or be offset by an adjustable voltage supplied on the Vcc- pin in the dual-supply configuration.
With a current consumption lower than 360 μA and a virtually null input leakage current in standby mode, the power consumption in the applications is minimized.
Independent supply and input common-mode voltages
Wide common-mode operating range: 2.9 V to 70 V in single-supply configuration,-2.1 V to 65 V in dual-supply configuration
Wide common-mode surviving range: -16 V to 75 V (reversed battery and load-dump conditions)
Supply voltage range: 2.7 to 5.5 V in single-supply configuration
Low current consumption: ICCmax = 360 μA
Pin selectable gain: 20 V/V, 25 V/V, 50 V/V or 100 V/V
Buffered output
